Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 608: RC Hardware Translation Audit (#1317) 2 of 3
Error
Code
Test
Result
Description / Recommendation
3 FAIL RC has incorrect DWBS System ID.
1. Enter display radio-controller loc to check the
administration. If administered translations are wrong, use
change carrier-frequencies and/or change system
parameters wireless to modify as needed.
2. Re-initialize the RC board using the busy, reset, and release
commands.
4 FAIL RC has incorrect radio data (EIC)
1. Enter display radio-controller loc to check the
administration. If administered translations are wrong, use
change carrier-frequencies and/or change system
parameters wireless to modify as needed.
2. Re-initialize the RC board using the busy, reset, and release
commands.
5 FAIL RC has incorrect radio data (E and ARC)
1. Enter display radio-controller loc to check the
administration. If administered translations are wrong, use
change carrier-frequencies and/or change system
parameters wireless to modify as needed.
2. Re-initialize the RC board using the busy, reset, and release
commands.
6 FAIL RC has incorrect modem operating parameters.
1. Enter display radio-controller loc to check the
administration. If administered translations are wrong, use
change carrier-frequencies and/or change system
parameters wireless to modify as needed.
2. Re-initialize the RC board using the busy, reset, and release
commands.
1988 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 3