09.12.2012 Views

Server Alarms - Avaya Support

Server Alarms - Avaya Support

Server Alarms - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Communication Manager Maintenance Object Repair Procedures<br />

● RANL-STA (Remote Analog Line (Station) Port)<br />

Table 396: ONS Ringer Application Test (#48) 1 of 2<br />

Error<br />

Code<br />

1000<br />

1004<br />

Test<br />

Result<br />

Description / Recommendation<br />

ABORT Could not allocate the necessary system resources to run this test.<br />

1. Retry the command at 1-minute intervals up to 5 times.<br />

ABORT System resources required to run this test are not available or the port<br />

was seized with a valid call during the test.<br />

1. Enter display port location to determine the station<br />

extension.<br />

2. Enter status station extension to determine the service state<br />

of the port. If the port is in use, wait until the port is idle.<br />

3. Retry the command at 1-minute intervals up to 5 times.<br />

1005 ABORT This test is not applicable for this type of port. This error can be ignored.<br />

1008 ABORT Could not allocate a ringing circuit. Either every ringing circuit is in use,<br />

or the ringing generator is defective or incorrectly wired.<br />

1. Retry the command at 1-minute intervals up to 5 times.<br />

2. If the test continues to abort, look for RING-GEN errors in the Error<br />

Log. If an ABORT 1008 occurs for this test on other circuit packs as<br />

well, then the ringing generator may be defective or incorrectly wired<br />

See RING-GEN (Analog Ring Generator).<br />

3. If ABORT 1008 does not occur on other ports, then all four ring<br />

phases are in use.<br />

1018 ABORT The test has been disabled by administration. Determine why the Test<br />

field on the change station screen has been set to n for this station. It<br />

may be due to the brief ringing disturbance that this test may cause.<br />

1. To enable the test for the particular analog station, enter<br />

change station extension and set the Test field to y.<br />

2000 ABORT Response to the test was not received within the time allowed.<br />

1. Retry the command at 1-minute intervals up to 5 times.<br />

2100 ABORT Could not allocate necessary system resources to run this test.<br />

1. Retry the command at 1-minute intervals up to 5 times.<br />

1510 Maintenance <strong>Alarms</strong> for <strong>Avaya</strong> Communication Manager, Media Gateways and <strong>Server</strong>s<br />

1 of 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!