Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Figure 150: ATM Board Framer Looparound Test (#1260) (non-EAA, Packet Path)
Table 594: ATM Board Framer Looparound Test (#1260) 1 of 5
Error
Code
Packet
interface
Test
Result
Packet bus
(PPN)
ATM
circuit
pack
PNC mode
ATM
switch
ATM
framer
looped
Description / Recommendation
ATM
circuit
pack
PNC mode
ATM
circuit
pack
ATM
expansion
archangel
PNC mode
TDM bus
(EPN X)
Packet bus
(EPN X)
Tone clock
Tone detector
iodfpak AWF 040699
1002 ABORT The system could not allocate time slots for the test. The system may be
under heavy traffic conditions, or it may have time slots out-of-service
due to TDM-BUS errors. A system is considered under heavy traffic when
the Call Processing Occupancy is greater than 50% or when the System
Management and the Call Processing Occupancies together exceed
65%.
1. Enter status health to view the occupancy measurements.
2. Enter display errors and resolve any TDM-BUS (TDM Bus)
errors.
3. If the system has no TDM-BUS errors and is not handling heavy
traffic, retry the command at 1-minute intervals up to 5 times.
1003 ABORT The system could not allocate a tone receiver for the test. The system
may be oversized for the number of Tone Detectors present, or some
Tone Detectors may be out of service.
1. Enter list measurements tone-receiver to see information
regarding the system’s tone receivers.
2. Resolve any TTR-LEV (TTR Level) errors.
3. Resolve any TONE-PT (Tone Generator) errors.
4. Retry the command at 1-minute intervals up to 5 times.
1960 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
1 of 5