Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 533: FIBER-LK Configuration Audit (#759) 9 of 9
Error
Code
Test
Result
Description / Recommendation
239 FAIL The SNI Endpoint 2 is assigned to be connected to a DS1 converter, but is
not physically connected to one.
1. Enter list fiber-link to see a fiber link’s endpoints.
If this SNI endpoint should be connected to a DS1 converter:
1. Enter list fiber-link to verify that the fiber-optic cable and/or
metallic cable connections are installed as assigned.
If not, change administration to remove the DS1 converter complex from
the SNI’s fiber link:
1. Enter list fiber-link to locate this SNI endpoint’s fiber
2. Enter remove fiber-link for this SNI endpoint’s fiber
3. Enter add fiber-link to replace the fiber without assigning the
DS1 converter complex.
240 FAIL The SNI Endpoint 2 is physically connected to a DS1 converter, but is not
assigned to be connected to one.
1. Enter list fiber-link to display a fiber link’s endpoints.
Either replace the DS1 converter with fiber:
1. Enter list fiber-link to verify that the fiber-optic and metallic
cable connections are installed as assigned
2. Disconnect the SNI endpoint from the DS1 converter
3. Enter add fiber-link to reconnect the SNI to its assigned fiber
or
Add a DS1 converter complex to the SNI’s fiber:
1. Enter list fiber-link to locate this SNI endpoint’s fiber
2. Enter remove fiber-link for this SNI endpoint’s fiber
3. Enter add fiber-link to replace the fiber and to assign the DS1
Converter complex
PASS The administered data and the circuit packs the SNI(s) can communicate
with match.
1818 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
9 of 9