Server Alarms - Avaya Support

Table 155: BRI-SET/Adjunct Error Log Entries 2 of 2
Error Type Aux
Data
3585-
3839 (n)
3840-
4095 (o) (p)
0
0
Associated Test Alarm
Level
BRI-SET
BRI-DAT
BRI-SET, Various Adjuncts
1. Major and Minor alarms for this MO may be downgraded to Warning alarms based on the value used with
set options.
Notes:
a. Error Type 0: Run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
b. Error Type 2: violations of the ISDN-BRI signaling protocol. Timers associated with certain
layer-3 messages have expired before a required response was received. In the following
table, the aux data field indicates what timer has just expired.
Aux Data Timer Type
Alarm
Level
ASAI-ADJ
ATT-ADJ
ATTE-AJ
LGATE-AJ
2 First T303 (SETUP timer)
On/ Off
Board
3 Second T303 (SETUP timer)
4 T305 (DISConnect timer)
5 First T308 (RELease timer)
6 Second T308 (RELease timer)
10 T316 (RESTart timer)
12 T309 (Layer-2 Failure timer)
Recommended Action
16 TM100 (Management Information message Timer 1)
17 TM200 (Management Information message Timer 2)
102 TASAI (ASAI Routing timer)
2 of 2
The switch sent a message to the endpoint that did not respond in the allotted time. This
can happen occasionally due to failure of the point-to-point signaling link or because of a
Communication Manager Release 5.0 Issue 4 January 2008 601