Server Alarms - Avaya Support

FIBER-LK (Fiber Link)
c. Error Type 18: the fiber link has been busied out via busyout fiber-link F P. To
resolve this error, use release fiber-link F P to release the fiber link.
d. Error Type 257: problem with the circuit path to the neighbor. See Repair procedures.
e. Error Type 513: problem with the packet path to the neighbor. See Repair procedures.
f. Error Type 769: problem with the control path from the neighbor. See Repair procedures.
g. Error Type 1025: problem with the circuit path from the neighbor. See Repair procedures.
h. Error Type 1281: problem with the packet path from the neighbor. See Repair procedures.
Repair procedures
For Note b and Notes d through h, perform the following steps:
1. Perform the Fiber link fault isolation in Chapter 4: General troubleshooting in Maintenance
Procedures (03-300432).
2. Enter display errors and if any of the listed slip errors exist, follow the associated repair
procedures in SYNC (Port Network Synchronization) for slip errors.
Table 215: Error Log Entries for Slip Errors
Circuit Pack Name Error Log Name Number of Slips
DS1 Interface DS1-BD 3073 to 3160
Expansion Interface EXP-INTF 2305
SNI SNI-BD 1537
Tone-Clock TDM-CLK 1025
UDS1 Interface UDS1-BD 3073 to 3160
Communication Manager Release 5.0 Issue 4 January 2008 837