Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ATM Board Error Query Test (#1259)
This test queries the board for its on-board health information. The test passes if there are no
failures on the board. The test fails if the circuit pack has hardware or signaling failures.
This test runs on ATM-EI (Expansion Interface Circuit Pack). and ATM-TRK (Circuit Emulation
Service Circuit Pack).
Table 591: ATM Board Error Query Test (#1259)
Error
Code
Test
Result
Description / Recommendation
2000 ABORT Response to the test was not received within the allowed time.
1. Retry the command at 1-minute intervals up to 3 times.
2031 ABORT Unable to send downlink message to the circuit pack.
1. Retry the command at 1-minute intervals up to 3 times.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 3 times.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
XXYY FAIL On-board hardware or off-board signaling errors on the board. XX
indicates the on-board hardware error, and YY indicates the off-board
errors as shown in Table 592: XX Error Codes, ATM Board Error Query
Test (#1259) or Table 593: YY Error Codes, ATM Board Error Query Test
(#1259).
1. Resolve any errors in the error log.
0 NO
BOARD
PASS No service-affecting errors or alarms were detected on the circuit pack.
See NO BOARD for the repair procedures.
1956 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers