Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
! WARNING:
WARNING: All ANN-BD alarms are upgraded to MAJOR when the BASE Tone Generator is
set to 12 (France).
Notes:
a. Error Type 0: Run the short test sequence first. If all tests pass, run the long test sequence.
Refer to the appropriate test description and follow the recommended procedures.
b. Error Type 1: the circuit pack totally stopped functioning or it was physically removed from
the system.
If the circuit pack is not in the system, insert a circuit pack in the same slot as the error
indicates to resolve this error. Or, if the circuit pack is in the system and the red LED is on,
follow the instructions for Red (alarm) in RIGHT LED in SERVICES port - GREEN (10 MB
link speed).
Note: The
Table 117: ANN-BD Error Log Entries 2 of 2
Error
Type
2049
(m) (n)
17680 inline Error
Clock Match Inquiry (#212) MIN ON test board location r 3
17674 inline Error
2305 140AY Looparound (#210) MIN ON test board location r 3
2561 Super Frame Match Inquiry (211) MIN ON test board location r 3
2817
(m)
Aux
Data
17676 inline Error
Announcement Checksum (#209) MIN ON test board location r 3
17682 inline Error
17699 inline Error
3840 (j) Any None
3999 (o) Any None
Associated test Alarm
Level (See
WRN
message)
On/off
Board
Recommended action
Note:
alarm is logged about 11 minutes after the circuit pack has been removed
and/or SAKI Test (#53) fails.
470 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2