Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 300: PE-BCHL Error Log Entries 2 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
18 (d) 0 busyout
pri-endpoint
extension
busyout port
location
release pri-endpoint
extension
release port location
129 (e) WRN OFF test port location
130 (f) WRN ON test port location
257 (g) Any test port location
513 (h) Any WRN OFF test port location
769 (g) Any test port location
1281 (i) Any Conference Circuit
Test (#7)
MIN ON test port location l r 4
1537 (j) Any NPE Crosstalk Test
(#6)
MIN ON test port location l r 3
1793 (k) Any test port location
3073 (l) Any Service State audit
(#256)
3585 (m) Any
On/Off
Board
Recommended Action
test port location r 2
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description and follow its procedures.
b. Error Type 1: disagreement between this switch and the terminal adapter at the other end
of the connection with regard to the ISDN call state of the PRI endpoint port. This switch will
automatically try to recover by clearing the call (the call will be torn down). Use status
pri-endpoint extension to determine the state of the port.
When running the short test sequence, note the results of the Call State Audit Test (#257).
c. Error Type 15: software audit error that does not indicate any hardware malfunction. Run
the short test sequence, and investigate associated errors.
d. Error Type 18: the PRI endpoint port has been busied out by busyout pri-endpoint
extension or busyout port location. No wideband calls can be made to this port,
although wideband calls can still be made to other ports within this PRI endpoint if they are
in service. Release the port with release port location.
1078 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2