Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 463: Link Retry Test (#215) 2 of 2
Error
Code
Test
Result
1010 ABORT The link has been busied out and is out-of-service.
PMS-LINK:
1. Enter release pms-link to release the PMS Link.
2. Enter test pms-link long to rerun the test.
PMS-PRNT, JNL-PRNT:
1. Enter release journal wakeup-log or release journal
pms-log to release the link from the busyout state.
2. Enter test journal wakeup-log long or test journal
pms-log long to rerun the test.
CDR-LNK, PRI-CDR, SEC-CDR:
1. Enter release cdr-link primary or release cdr-link
secondary to release the CDR link from the busyout state.
2. Enter test cdr-link primary long or test cdr-link
secondary long to rerun the test.
SYS-PRNT:
1. Enter release sp-link to release the System Printer Link from the
busyout state.
2. Enter test sp-link long to rerun the test.
2012 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
Neon Test (#220)
Description / Recommendation
FAIL The link cannot be established.
1. See Procedures for Restoring the System Printer Link for instructions.
PASS The output device link is up.
This test checks the voltage required to light the neon lamp on an analog terminal. A relay
connects a 150V DC source from the backplane of the circuit pack onto the voltage bus, and
1656 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2