Server Alarms - Avaya Support

LEDs
Table 91: MM314 Port LEDs 2 of 2
LED Name Meaning
FDX Full Duplex ON when in full-duplex mode
FC Flow Control ON - the port is in Full Duplex and in Flow Control mode.
OFF - the port Flow Control mode is disabled or is
operating in half duplex mode.
HSPD High Speed If the LED is ON, the port is operating at the higher of its
possible speeds.
LAG Link Aggregation If the LED is ON, the port is a member of a LAG.
PoE Power over Ethernet If the LED is ON, the port is operating in PoE mode.
MM316 LAN Media Module LEDs
The MM316 Media Module has the following LEDs:
● A red ALM LED
● 40 dual-colored (yellow/green) faceplate port LEDs, one for each port
● A yellow LED for the 100/1000 Base-T Ethernet Port (LED 51)
The blinking rate is proportional to the traffic rate. All LEDs are turned on during a reset.
Name Color Description
ALM Red OFF after initialization tests have successfully passed.
ON when a problem has been detected.
BLINKING indicates an administration mismatch between
Communication Manager and this Media Module.
Port LED Green ON - Link is up, port is enabled, no traffic, PoE delivered.
BLINK - Ethernet traffic with PoE being delivered
Port LED Yellow ON - Link is up, port is enabled, no traffic, no PoE delivered.
BLINK - Ethernet traffic without PoE being delivered.
51 Yellow ON - Link is up, port is enabled, no traffic, no PoE delivered.
BLINK - Ethernet traffic without PoE delivered.
346 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2