Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
- A condition that caused the system to enter License-Error mode has not been corrected
or resolved, and the countdown timer has expired.
- The switch returns to License-Normal mode when every license error is cleared.
Login Warning Messages
Anyone logging onto the SAT (System Administration Terminal) when the system is in
License-Error or No-License mode, receives a warning message stating the system’s Licence
mode, depending on the conditions. Table 258: Error messages and repair procedures shows
the 3 license modes, the warning message, describes the error conditions, and lists the
recommended repair procedures.
Table 258: Error messages and repair procedures
License Mode Description Explanation and repair procedure
License-Normal No mismatches
between license
and hardware
License-Error Warning mode;
Communication
Manager
supported, 30-day
countdown timer
begins.
No-License Warning period has
expired.
Stable running condition
If you log in to the server through the SAT, a message
reads: “System Administration Will Be Blocked in
Approximately XXX hours. Contact Your Service
Representative.” Communication Manager functions
normally for 'XXX' hours, at which time the system
goes into No-License mode.
One of the following conditions is present:
● Serial number reference source not
responding.
● The License file expired.
● Feature use does not match the License file.
If you log in to the server through the SAT, a message
reads: “System Administration Is Blocked. Contact
Your Service Representative Immediately.”
One of the following conditions is present:
● No License file is installed in the system.
● The License-Error timer expired.
948 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers