Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ALARM-PT (Alarm Port)
MO Name in Log Alarm
Level
The Alarm Port MO provides on-board maintenance for an analog line port that is administered
as an external device alarm port. Tests are provided to verify the analog line port’s ability to
detect an external device alarm. The related MO, EXT-DEV ADMIN? Y (External Device Alarm),
is used for the off-board external device alarm.
Error log entries and recommended actions
Initial Command to Run Full Name of MO
ALARM-PT MIN test port location l Alarm Port
Table 113: ALARM-PT Error Log Entries
Error
Type
Aux
Data
WRN test port location
Associated Test Alarm
Level
On/Off
Board
Recommended action
0 (a) 0 Any Any Any test port location
15 (b) Any Port Audit and
Update (#36)
18 0 busyout station
extension
WRN OFF release station extension
130 (c) None WRN ON test port location
Notes:
a. Error Type 0: Run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended repair
procedures.
b. Error Type 15: software audit error that does not indicate any hardware malfunction. Run
the short test sequence and investigate errors.
c. Error Type 130: the circuit pack or media module was removed or has been insane for
more than 11 minutes. To clear the error, reseat or replace the circuit pack or media module.
450 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers