Server Alarms - Avaya Support

Table 189: DS1 Facility Line Signal Equalization Values 2 of 2
DS1 Converter-1 and
DS1 Converter-2 Line
Compensation
(cont’d)
Equalizer
Setting
Distance to Network Interface (feet)
Cable type 22 AWG ABAM &
24 AWG PDS
3 266 to 399 180 to 270
4 399 to 533 270 to 360
5 533 to 655 360 to 450
DS1 Converter Performance Measurements Report
DS1-FAC (DS1 Facility)
Cable type 26
AWG PDS
2 of 2
The DS1 Converter Performance Measurements provide link performance measurements for
the DS1 facilities.
When no facility alarms exist on the DS1 facility, events that indicate a degradation in the
performance of the DS1 facility are monitored and recorded. These events will generate alarms
when performance of the DS1 facility has degraded below acceptable levels. These
measurements include errored seconds, bursty seconds, severely errored seconds, and failed
seconds.
There are two DS1 Converter Performance Measurements Sub-reports:
● The DS1 Converter Performance Measurements Summary Report provides information
about the worst 15-minute interval of data, the total for 24 hours of data and the current
15-minute counter for each of the previously mentioned counters.
● The DS1 Converter Performance Measurements Detailed Report displays a detailed log
for the last 96 15-minute intervals for each of the previously mentioned counters.
Access the DS1 Converter Performance Measurements Summary Report with list
measurements ds1-facility summary location [print | schedule]. Access a
more detailed version of the report with list measurements ds1-facility log
location f [print | schedule].
You can reset every hardware- and software-measurement counter for a given facility with
clear measurements ds1-facility location f. The Counted Since time is also
reset and the Number of Valid Intervals count is set to zero.
The reports are printed on the screen or, by using the print option, on a printer attached to the
terminal.
Communication Manager Release 5.0 Issue 4 January 2008 735