Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 627: DSP Port Status Query Test (#1407) 2 of 2
Error
Code
Test
Result
Description / Recommendation
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 3 times.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 3 times.
FAIL Unable to get status for this port. Verify that this board has been
administered correctly, and that there are no alarms against this board.
PASS The board is functioning properly and the port is in-service and
available.
0 NO
BOARD
See NO BOARD for repair procedures.
Firmware Download Test (#1413)
This test is destructive.
This test has two functions and can only be executed if there is a download schedule to verify or
if there are FW-DWNLD errors to resolve and alarms to clear.
1. This test verifies that the information on the FIRMWARE DOWNLOAD screen is correct. It
also verifies that the source board is of the correct type, the file to be downloaded is present
on that source board, and the file is free of errors. In addition, it verifies that the target board
code and suffix are correct. It also retrieves the new firmware vintage for the target board
and populates the appropriate field in the firmware download table.
2. If this test is executed after a FIRMWARE DOWNLOAD schedule has run and there are
FW-DWNLD alarms/errors, it resolves the errors, clears the alarms, copies the current
download status table to the last table, and clears out the current table.
Table 628: Firmware Download Test (#1413) 1 of 3
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
2014 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2
1 of 3