ARM Architecture Reference Manual ARMv7-A and ARMv7-R edition

Max() Maximum of integers or reals Maximum and minimum on
page AppxI-16
MemA[] Memory access that must be aligned, at
current privilege level
MemA_unpriv[] Memory access that must be aligned,
unprivileged
MemA_with_priv[] Memory access that must be aligned, at
specified privilege level
MemorySystemArchitecture() Return memory architecture of system
(VMSA or PMSA)
MemU[] Memory access without alignment
requirement, at current privilege level
MemU_unpriv[] Memory access without alignment
requirement, unprivileged
MemU_with_priv[] Memory access without alignment
requirement, at specified privilege level
Pseudocode Index
Aligned memory accesses on
page B2-31
MemorySystemArchitecture() on
page AppxI-26
Unaligned memory accesses on
page B2-32
Min() Minimum of integers or reals Maximum and minimum on
page AppxI-16
NOT() Bitwise inversion of a bitstring Logical operations on bitstrings on
page AppxI-13
NullCheckIfThumbEE() Perform base register null check if a
ThumbEE instruction
Null checking on page A9-3
Ones() All-ones bitstring Bitstring concatenation and
replication on page AppxI-12
PCStoreValue() Value stored when an ARM instruction
stores the PC
PolynomialMult() Multiplication of polynomials over {0,
1}
Pseudocode details of operations on
ARM core registers on page A2-12
Pseudocode details of polynomial
multiplication on page A2-67
ProcessorID() Return integer identifying the processor ProcessorID() on page AppxI-26
Q[] Quadword view of the Advanced SIMD
and VFP registers
Table J-2 Pseudocode functions and procedures (continued)
Function Meaning See
Advanced SIMD and VFP extension
registers on page A2-21
ARM DDI 0406B Copyright © 1996-1998, 2000, 2004-2008 ARM Limited. All rights reserved. AppxJ-15