ARM Architecture Reference Manual ARMv7-A and ARMv7-R edition

Assembler syntax
ADC{S} {,} , #
where:
Instruction Details
S If S is present, the instruction updates the flags. Otherwise, the flags are not updated.
See Standard assembler syntax fields on page A8-7.
The destination register.
The first operand register.
The immediate value to be added to the value obtained from . See Modified immediate
constants in Thumb instructions on page A6-17 or Modified immediate constants in ARM
instructions on page A5-9 for the range of values.
The pre-UAL syntax ADCS is equivalent to ADCS.
Operation
if ConditionPassed() then
EncodingSpecificOperations();
(result, carry, overflow) = AddWithCarry(R[n], imm32, APSR.C);
if d == 15 then // Can only occur for ARM encoding
ALUWritePC(result); // setflags is always FALSE here
else
R[d] = result;
if setflags then
APSR.N = result;
APSR.Z = IsZeroBit(result);
APSR.C = carry;
APSR.V = overflow;
Exceptions
None.
ARM DDI 0406B Copyright © 1996-1998, 2000, 2004-2008 ARM Limited. All rights reserved. A8-15