Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
For a system with a TN768, TN780, or TN2182 circuit pack:
Order of Investigation Short
Test
Sequence
Long Test
Sequence
Notes:
a. This test runs only on the standby IPSI or Tone-Clock circuit in a port network with
duplicated Tone-Clocks (high- or critical-reliability systems). The circuit pack must be a
TN780 with firmware version 2 or above.
1010 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Reset
Board
Sequence
SAKI Sanity Test (#53) X D
Clock Health Inquiry Test (#46) X X ND
Control Chel Looparound Test (#52) X X ND
Tone Generator Crosstalk Test (#90) X ND
Tone Generator Transmission Test (#40) X X ND
Tone Generator Update/Audit Test (#41) X X ND
Tone Detection Verification Test (#42) X X ND
Tone Detector Audit/Update Test (#43) X X ND
TDM Bus Clock Circuit Status Inquiry Test (#148) X X ND
TDM Bus Clock Slip Inquiry Test (#149) X X ND
TDM Bus Clock PPM Inquiry Test (#150) X X ND
TDM Bus Clock Parameter Update Test (#151) X X ND
Board Type Check Test (#574) X X ND
Standby Reference Health Check Test (#651) (a) X ND
1. D = Destructive; ND = Nondestructive
D/
ND 1