Demand test descriptions and error codes - Avaya Support
19.12.2012 • Views
Share Embed Flag

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
support.avaya.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Maintenance <strong>Dem<strong>and</strong></strong> Tests<br />

MMI Synchronization Status Test (#1122)<br />

To support applications involving multiple MMI circuit packs, the appropriate MMI circuit packs<br />

must be synchronized with one another. One such circuit pack is designated as the master sync<br />

source, which provides the synchronization signal onto the TDM bus. The other MMI circuit<br />

packs in the system listen to this signal.<br />

This <strong>test</strong> monitors this synchronization state. The <strong>test</strong> fails if the MMI circuit pack is not in sync.<br />

The <strong>test</strong> passes with auxiliary code 1100 if the MMI circuit pack is in sync <strong>and</strong> is providing the<br />

synchronization signal for the system. The <strong>test</strong> also passes with an auxiliary code of 1101 if the<br />

MMI circuit pack is in sync <strong>and</strong> listening to the sync signal. MMI circuit packs do not lose the<br />

synchronization signal unless an MMI circuit pack is either pulled out of the system or reset by<br />

using a technician comm<strong>and</strong>.<br />

Test #1122 runs when <strong>test</strong> board location long is entered, initiating the recovery of<br />

synchronization. Use the long option only if synchronization is not established within 5 minutes<br />

of investigating the problem.<br />

This <strong>test</strong> is run on MMI-BD (Multimedia Interface Circuit Pack).<br />

Table 479: MMI Synchronization Status Test (#1122) 1 of 2<br />

Error<br />

Code<br />

Test<br />

Result<br />

Description / Recommendation<br />

ABORT Internal system <strong>error</strong>. This is an abnormal abort.<br />

1. Retry the comm<strong>and</strong> at 1-minute intervals up to 5 times.<br />

2000 ABORT A response to the <strong>test</strong> was not received within the allowed time.<br />

1. Retry the comm<strong>and</strong> at 1-minute intervals up to 5 times. If this<br />

result occurs repeatedly <strong>and</strong> the MMI circuit pack is idle, reset the<br />

circuit pack.<br />

2. Rerun the <strong>test</strong>. If the same result occurs again, replace the MMI<br />

circuit pack.<br />

2012 ABORT Internal system <strong>error</strong><br />

1. Retry the comm<strong>and</strong> at 1-minute intervals up to 5 times.<br />

2100 ABORT Could not allocate the necessary resources to run this <strong>test</strong>.<br />

1. Retry the comm<strong>and</strong> at 1-minute intervals up to 5 times.<br />

1572 Maintenance Alarms for Communication Manager, Media Gateways <strong>and</strong> Servers<br />

1 of 2

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!