19.12.2012 Views

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TBRI-PT (ISDN Trunk-Side BRI Port)<br />

MO Name in Log Alarm Level Initial Comm<strong>and</strong> to Run Full Name of MO<br />

TBRI-PT MAJ<br />

MIN<br />

<strong>test</strong> port location l ISDN Trunk-side BRI<br />

port<br />

WRN <strong>test</strong> port location<br />

The TBRI-PT maintenance object is a port on both the TN2185 Trunk-Side BRI circuit pack <strong>and</strong><br />

the MM720 BRI Media Module. The term circuit pack in the following description refers to<br />

both the circuit pack <strong>and</strong> the media module.<br />

The location on the TN2185 Trunk-Side BRI circuit pack is the UUCSSpp designation.<br />

The location on the MM720 BRI Media Module is designated by GGGVSPP. Consult local<br />

records for the location <strong>and</strong> designation of the equipment rack where the Media Gateway is<br />

mounted.<br />

The TN2185 circuit pack contains eight, 4-wire ports that interface to the network at the ISDN S/<br />

T reference point over two 64-kbps chels (B1 <strong>and</strong> B2) <strong>and</strong> over a 16-kbps signaling (D) chel.<br />

The B1 <strong>and</strong> B2 chels can be simultaneously circuit-switched, or individually packet-switched.<br />

Only one chel per trunk can be packet-switched due to PPE (Packet Processing Element)<br />

limitations. The D-Chel is either circuit- or packet-switched. Packet switching uses the PPE to<br />

combine all D-Chels into a single physical chel, which is then routed via the concentration<br />

highway to the NCE (Network Control Element) <strong>and</strong> then to the TDM bus. The circuit-switched<br />

connections have a Mu-law or A-law option for voice <strong>and</strong> operate as 64-kbps clear data chels.<br />

The packet-switched chels support the LAPD protocol <strong>and</strong> conform with the CCITT Q.920<br />

Recommendations for D-Chel signaling.<br />

The MM720 BRI Media Module provides 8 S/T ISDN 2B+D ports that interface to either the<br />

central office or another PBX. The MM720 contains eight, 4-wire ports that interface to the<br />

network at the ISDN S/T reference point over two 64 Kb/s chels (B1 <strong>and</strong> B2) <strong>and</strong> over a 16Kb/s<br />

signaling (D) chel. The B1 <strong>and</strong> B2 chels can be simultaneously circuit switched, or individually<br />

packet switched. Only one chel per trunk can be packet switched due to Packet Processing<br />

Element (PPE) limitations. The D-chel is circuit switched. The circuit-switched connections have<br />

a Mu-law or A-law option for voice <strong>and</strong> operate as 64Kb/s clear data chels.<br />

942 Maintenance Alarms for Communication Manager, Media Gateways <strong>and</strong> Servers

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!