Demand test descriptions and error codes - Avaya Support

IPMEDPRO (TN2302 IP Media Processor)
If the circuit pack type is TN2602AP, see IPMEDPRO (TN2602AP IP Media Resource 320).
MO Name in Log Alarm
Level
IPMEDPRO MAJ
MIN
The TN2302 (IP Media Processor) circuit pack is the next generation VOIP platform. The
TN2302 includes a 10/100 BaseT Ethernet interface to support IP audio for IP trunks and H.323
endpoints. The TN2302 can perform echo cancellation, silence suppression, DTMF detection,
and conferencing. It supports the following codecs, fax detection for them, and conversion
between them:
● G.711 (mu-law or a-law, 64 kbps)
● G.723.1 (6.3-kbps or 5.3-kbps audio)
Initial Command to Run Full Name of MO
test board location l IP Media Processor
WRN test board location
● G.729A (8-kbps audio)
The TN2302 circuit board provides voice over IP connectivity. The TN2302 acts as a service
circuit to terminate generic RTP streams which carry packetized audio over an IP network. As
part of the overall H.323 implementation, the TN2302 circuit pack handles the audio streams
while the TN799DP C-LAN handles the TCP/IP signaling chels.
Error log entries and recommended actions
Table 140: TN2302 IPMEDPRO Error Log Entries 1 of 3
Error Type Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended Action
0 1 0 Any Any Any test board location
1 (a) 0 Circuit pack
removed or SAKI
test (#53) failed
18 (b) 0 busyout board
location
23 (c) 0 Board
administered but
not inserted
MIN ON
WRN OFF release board location
WRN OFF insert the board into the
system
512 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 3