Demand test descriptions and error codes - Avaya Support

Table 471: SNI Fiber Out of Frame Query Test (#989) 3 of 8
Error
Code
141
142
Test
Result
Description / Recommendation
SNI Fiber Out of Frame Query Test (#989)
FAIL The SNI circuit pack has a fiber out of frame condition, but no loss of
signal condition.
Error Code 141: A lightwave transceiver is connected to the SNI circuit
pack.
Error Code 142: No lightwave transceiver is connected to the SNI circuit
pack.
1. Check that the connected circuit pack is physically installed. The
connected circuit pack is the other endpoint of the fiber-link if no
DS1C complex is administered. Check using list fiber-link.
Otherwise, if a DS1C complex is administered, the connected circuit
pack is the DS1C circuit pack connected to the SNI circuit pack.
2. If a lightwave transceiver should not be present, go to step 3. For
example, an SNI connected to a DS1C circuit pack or an SNI with a
metallic connection does not have a lightwave transceiver.
Otherwise, check the lightwave transceiver connections. If OK,
replace the lightwave transceiver. If a fiber out-of-frame condition
exists and lightwave transceivers are used, check that the lightwave
transceivers are of the same type, that is, both are 9823a or both are
9823b. If they are not the same type, replace one of the lightwave
transceivers:
● 9823a is used for distances up to 4,900 feet.
● 9823b is used for distances up to 25,000 feet.
3. Perform the Fiber link fault isolation procedure in Maintenance
Procedures for Avaya Aura Communication Manager, Media
Gateways and Servers (03-300432).
4. Replace this SNI circuit pack.
5. Replace the connected circuit pack.
3 of 8
Issue 5 May 2009 1551