Demand test descriptions and error codes - Avaya Support

● Ports 1 AND 9 abort Test 206 with code 1024.
● Ports 1 AND 9 abort Test 205 with code 2000.
-BD (Announcement circuit pack)
● Board-level Tests 209 and 210 abort with code 1024.
3. The save/restore announcements times out with:
Error encountered, can’t complete request
The announcement circuit pack lock-up can be cleared remotely by performing a soft reset to
the circuit pack:
● busyout board location (this command drops every call in progress on the
announcement circuit pack).
● Reset the circuit pack using reset board location.
● Release the board using release board location.
Error log entries and recommended actions
Table 21: -BD Error Log Entries 1 of 2
Error
Type
Aux
Data
Associated test Alarm
Level (See
WRN
message)
On/off
Board
Recommended action
0 (a) 0 Any Any Any test board location
1 (b) 0 Circuit pack removed or SAKI Test
failed (#53)
2 (c)
None
14 (d) 1 to 64 announcement Checksum (#209)
MIN ON
18 0 busyout board location WRN OFF release board location
23 (e) 0 None WRN OFF
125 (f) None MIN ON
170 0 None MIN ON
217 (g) 0 None WRN OFF
257 65535 Control Chel Looparound Test (#52) MIN ON test board location l r 20
257 (h) Any None
267 (g) 0 None WRN OFF
1 of 2
Issue 5 May 2009 91