Demand test descriptions and error codes - Avaya Support

ANL-LINE (8-Port Analog Line)
MO Name in Log Alarm
Level
Error log entries and tests apply to ANL-LINE and ANL-NE-L.
The 8-port Analog Line circuit packs,
ANL-LINE (8-Port Analog Line)
Initial Command To Run Full Name of MO
ANL-LINE MIN test port location l 8-Port Analog Line
WRN test port location
ANL-NE-L MIN test port location l 8-Port Neon Analog Line
WRN test port location
TN411 TN443 TN467
TN712 TN742 TN769
provide eight ports for single-line, on or off-premises analog endpoints such as analog voice
terminals, queue warning level lamps, recorded announcements, dictation machines,
PAGEPAC paging equipment, external alerting devices, modems, fax machines, and AUDIX
voice ports. Only the TN769 supports a neon message waiting lamp.
Note:
Note: PAGEPAC is a registered trademark of Harris Corporation, Dragon Division.
Test #48 may cause some terminal equipment to ring briefly during daily maintenance, which
may disturb the customer or the terminal equipment. Test #47 may cause a false alarm when
the port is connected to certain off-premises equipment, non-voice terminal equipment, or loop
equipment. In either case, the tests can be disabled by entering n in the Tests field on the
change station extension screen. Be aware that this will disable Tests 6, 35, 47, and 48.
No maintenance of the terminal connected to the 8-Port Analog Line circuit pack or 8-Port Neon
Analog Line circuit pack is performed, except to determine whether or not the terminal is
connected. Failures of the common ringing application circuitry and the neon message waiting
lamp power (ANL-NE-L only) are reported as errors 1281and 1793 against XXX-BD (Common
Port Circuit Pack) in Common Port Circuit Pack Maintenance Error Log Entries.
Issue 5 May 2009 83