Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 287: GPP NPE Crosstalk Test (#9) 6 of 6
Error
Code
1
2
Any
Test
Result
Description / Recommendation
FAIL The NPE of the tested port is transmitting in error. This causes noisy
and unreliable connections.
M/T-ANL and M/T-DIG:
1. If the remaining ports are currently idle (amber LED is off), try to
reset the circuit pack and rerun the test.
2. If the problem persists, replace the circuit pack.
All other Maintenance Objects:
Error code 1 = Crosstalk test failed on the primary chel.
Error code 2 = Crosstalk test failed on the secondary chel.
1. Replace the circuit pack.
CAUTION: ADX8D-PT
! CAUTION:
and ADX16D-P: Shut down AUDIX before
replacing the EMBEDDED AUDIX circuit pack.
PASS The port is using its allocated time slots correctly.
1. To ensure that this is not an intermittent problem, repeat this test
up to 10 times and see if it continues to pass.
2. If the problem still exists, examine the stations, connections, and
wiring.
1104 Maintenance Alarms for Communication Manager, Media Gateways and Servers
6 of 6