Demand test descriptions and error codes - Avaya Support

Error log entries and recommended actions
Table 213: POWER Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 3840: this error is valid only for AC-powered multicarrier cabinets with battery
backup. For DC-powered cabinets, ignore the error; it cannot be cleared.
For AC-powered cabinets, see if the battery charger is connected. If the cabinet is powered
by a UPS, there is no battery backup and this error can be ignored.
Demand test descriptions and error codes
On/Off
Board
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
776 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Recommended Action
0 (a) 0 Any Any Any test environment UU
1 Any Battery and Power Supply
Query (#5) (Error Code 8)
MIN ON test environment UU
257 Any Battery and Power Supply
Query (#5) (Error Code 4)
MIN ON test environment UU
769 Any Battery and Power Supply
Query (#5) (Error Code 2)
MIN ON test environment UU
3840 (b) 1005
1028
Battery and Power Supply
Query (#5)
Order of Investigation Short Test
Sequence
test environment UU
Long Test
Sequence
D/ND 1
Battery and Power Supply Query Test (#5) X X ND
AC Power Query Test (#78) X X ND
OLS/Power Unit Query Test (#127) (Carrier E) X X ND
OLS/Power Unit Query Test (#127) (Carrier D) X X ND
1 of 2