Demand test descriptions and error codes - Avaya Support

Table 172: TN802 LCD messages for IP trunks 2 of 2
Display Explanation
MSHUT #,
where both
MSHUT and
# are blinking
MSHUT #,
where # is
blinking
Shutting Down NT on the TN802
The system is in the process of shutting down due to a front panel button
press. Do not attempt to remove board.
The system has shut down gracefully.
Before removing the TN802 circuit pack from the carrier, shut down Windows NT on the TN802
by following the procedure described in Table 173: Windows NT TN802 shutdown procedures:
Table 173: Windows NT TN802 shutdown procedures
Step Faceplate button
1. Push the recessed button on the front
faceplate and hold it in.
2. “M shut” flashes on the LCD display
3. When shutdown is complete, “MSHUT
#” displays (“#” is blinking).
4. Remove the circuit pack.
606 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2