Demand test descriptions and error codes - Avaya Support

MG-DCP (Digital Line Media Module)
1. The media module level tests such as Test #51 and/or Test #220 are aborting with
Error Code 2000.
2. The tests run on the ports of this media module are returning with a NO-BOARD.
3. A busyout/release of the media module has no effect on test results.
4. A list configuration command shows that the media module and ports are
properly installed.
Check the alarm level. If the alarm level is a WARNING, users are probably causing the
hyperactivity by adjusting or changing their digital stations. If the media module is very
hyperactive, this alarm will be upgraded to a MINOR alarm within 1 hour. If the alarm level
is a MINOR alarm, then replace the media module.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long Test
Sequence
Control Chel Looparound Test (#52) X X ND
1. D = Destructive; ND = Nondestructive
D/ND 1
NPE Audit Test (#50) X ND
Issue 5 May 2009 637