Demand test descriptions and error codes - Avaya Support

REM-OFF (Remote Office)
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
REM-OFF MIN
WRN
An instance of this MO (REM-OFF) is associated with every Remote Office box that is
administered on the switch. This MO monitors keep-alive and periodic PING test failures.
Error log entries and recommended actions
Table 223: REM-OFF Error Log Entries
Error Type Aux
Data
Notes:
a. Error Type 1: a PING test to the Remote Office has failed and a MINOR alarm has been
raised. When this error is logged, as many as 26 endpoints associated with that Remote
Office and several H.323 signaling groups could be out of service.
b. Error Type 257: The response to a keep-alive update request exceeded the time limit for an
endpoint. The error is a log-only error. It is not possible to determine which entity has failed.
The aux data associated with this error indicates whether the endpoint that failed to
respond was a DCP, Analog, or Signaling Group type:
● 1096 = Analog Line
● 1095 = DCP Line
Associated
Test
● 6179 = H.323 Signaling Group
ping node-name node-name |
ip-address location
Alarm
Level
On/Off
Board
Demand test descriptions and error codes
Recommended Action
There are no demand tests for REM-OFF. Use ping ip-address or ping node-name to
ping the Remote Office.
810 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Remote Office
1 (a) MIN OFF ping node-name node-name
ping ip-address addr
257 (b) Log only OFF ping node-name node-name
ping ip-address addr