Demand test descriptions and error codes - Avaya Support

Aux Data
(slot no.)
14 114
15 115
16 116
17 117
18 118
19 119
20 120
h. Error Type 6005: a link does not exist to one of the SNCs. If the Aux Data is not 1 or 2, the
link from this SNI to the active SNC does not exist. If the Aux Data is 1, the link from this
SNC to the active SNC does not exist. If the Aux Data is 2, the link from this SNC to the
standby SNC does not exist.
To resolve this error, refer to FAIL code 112 for Configuration Audit (#759).
i. Error Type 6006: the SNI is administered to be connected to a DS1C but is not.
To resolve this error, refer to FAIL code 139 for Configuration Audit (#759).
j. Error Type 6007: the SNI is connected to a DS1C, but no DS1C is administered.
To resolve this error, refer to FAIL code 140 for Configuration Audit (#759).
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Test 759
FAIL Code
2 of 2
Long Test
Sequence
Reset Board
Sequence
Configuration Audit (#759) X X ND
Processor Route Audit Test (#760) X ND
1. D = Destructive, ND = Nondestructive
846 Maintenance Alarms for Communication Manager, Media Gateways and Servers
D/ND 1