Demand test descriptions and error codes - Avaya Support

Table 35: ATM Error Types 1024 - 1151 3 of 3
Error
Type
ATM-EI (Expansion Interface Circuit Pack)
Description General problem
1113 Problems detected by the
board terminating the
connection
1. Test the ATM-EI circuit pack (test board location) and investigate further based
on each test’s results. If every test passes, the error was a transient problem.
Aux Data values: For Setup and Add Party connection request failure type, the
port-network and the Angel number of the destination ATM-EI circuit pack are logged Aux
Data values in the form XXYYY, where
● port-network number = XX
● Angel number = YYY
Since you need to know the slot number also, Table 36: Error Type 1024-1151 Converted
Aux Data Values converts the Aux Data to slot numbers.
Table 36: Error Type 1024-1151 Converted Aux Data Values 1 of 2
Slot Carrier
Slot # Set
up
A B C D E
Failure type Failure type Failure type Failure type Failure type
Add
Party
Set
up
Add
Party
Set
up
Add
Party
Set
up
Add
Party
1 28 528 66 566 98 598 34 534 02 502
2 29 529 67 567 99 599 35 535 03 503
3 30 530 68 568 100 600 36 536 04 504
4 31 531 69 569 101 601 37 537 05 505
5 56 556 70 570 102 602 38 538 06 506
6 57 557 71 571 103 603 39 539 07 507
7 58 558 72 572 104 604 40 540 08 508
8 59 559 73 573 105 605 41 541 09 509
9 60 560 74 574 106 606 42 542 10 510
Set
up
Add
Party
1 of 2
3 of 3
Issue 5 May 2009 135