Demand test descriptions and error codes - Avaya Support

Table 262: TIE-DS1 Error Log Entries 2 of 2
Error
Type
Aux
Data
513 (h) 57392 DS1 Tie Trunk
Seizure (#136)
769 (i) 57393 DS1 Tie Trunk
Seizure (#136)
1025 DS1 Tie Trunk
Seizure (#136)
1281 Conference Circuit
Test (#7)
1537 NPE Crosstalk Test
(#6)
MAJ
MIN 2
MAJ
MIN 2
TIE-DS1 (DS1 Tie Trunk)
MIN OFF test trunk grp#/mem# r 2
2
WRN
MIN ON test trunk grp#/mem# l r 4 1
2
WRN
MIN ON test trunk grp#/mem# l r 3 1
2
WRN
1793 (j) test board location long 1
2305 (k) 50944 DS1 Tie Trunk
Seizure (#136)
2562 (l) 16665
2817 (m) 52992
3840 (n) Any Port Audit and
Update (#36)
Associated Test Alarm
Level
MAJ
MIN 2
On/Off
Board
1. For TN767B vintage 8 or 9 circuit packs, a failure of Test #136 causes a subsequent failure of
Test #7. Test #136 is part of the short sequence and generates off-board alarms. Test #7 is part
of the long sequence and generates on-board alarms. Before entering busyout, release, reset or
test board long commands, check the vintage number of the circuit pack with list
configuration board location. If it is TN767B vintage 8 or 9, do not use the above
commands until you ensure sure that Test #136 passes via test board short. Otherwise,
extraneous on-board alarms may be generated.
2. Major or Minor alarms on this MO may have been downgraded to Warning based on the values
in set options.
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
OFF
Recommended Action
2 of 2
Issue 5 May 2009 975