Demand test descriptions and error codes - Avaya Support

BRI-PORT (ISDN-BRI Port)
Note: The
MO Name in
Log
Alarm
Level
BRI-PORT (ISDN-BRI Port)
Note:
section, Isolating and repairing packet-bus faults in Maintenance Procedures
for Avaya Aura Communication Manager, Media Gateways and Servers
(03-300432), along with the other information presented in the chapter, can help
resolve problems involving more than one station or circuit pack.
WARNING: If a significant packet bus failure occurs, errors and alarms may not be logged as
expected for BRI-PORT/ABRI-POR/ATT-PORT/ LGATE-PT/ ATTE-PT. Conditions
under which this occurs are detailed in Isolating and repairing packet-bus faults in
Maintenance Procedures for Avaya Aura Communication Manager, Media
Gateways and Servers (03-300432).
The following circuit packs/media modules support this maintenance object:
● TN2208 LGATE Multifunction Board (MFB)
● TN556 ISDN-BRI Line circuit pack
● TN2198 ISDN-BRI Line circuit pack
● MM720 BRI Media Module
Initial Command to Run Full Name of MO
BRI-PORT MIN test port location l ISDN-BRI port
WRN test port location
ABRI-POR MAJ 1 test port location l ASAI ISDN-BRI port
WRN 1
ATT-PORT MAJ 1
WRN 1
LGATE-PT MAJ 1
WRN 1
test port location l Avaya Adjunct ISDN-BRI port
test port location l Ethernet ASAI port
ATTE-PT MAJ
1. Major alarms may be downgraded to Warning alarms based on the value used in set options.
1
WRN 1
test port location l Ethernet Avaya Adjunct port
Issue 5 May 2009 215