Demand test descriptions and error codes - Avaya Support

IPMEDPRO (TN2602AP IP Media Resource 320)
If the circuit pack type is TN2302, see IPMEDPRO (TN2302 IP Media Processor)
See MEDPRO-C (Media Processor Control) for additional information on the TN2602AP IP
Media Resource 320.
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
IPMEDPRO MAJ
MIN
The TN2602AP IP Media Resource 320 enables IP port network connectivity. The TN2602AP
allows bearer traffic to be moved from the traditional Center Stage Switch (CSS) or ATM
network to the IP network. Together with the TN2312BP IPSI-2 circuit pack, the TN2602AP is
intended to be a traditional CSS replacement for port network connectivity.
The TN2602AP includes a 10/100 BaseT Ethernet interface to support IP audio for IP trunks
and H.323 endpoints.
The TN2602AP IP Media Resource 320 provides high-capacity voice over Internet protocol
(VoIP) audio access to the switch for local stations and outside trunks. The TN2602AP provides
audio processing for the following types of calls:
● TDM-to-IP and IP-to-TDM
● IP-to-IP
See Figure 31 for an example of the IP Media Resource 320 faceplate
Figure 31: IP Media Processor faceplate
700261928
TN2602AP Media Resource 320
04J219701400 HV1
ckdf2602 KLC 020305
test board location l IP Media Resource 320
WRN test board location
AVAYA
S
E
R
V
I
C
E
The TN2602AP IP Media Resource 320 circuit pack has two capacity options, both of which are
determined by the license file installed on Communication Manager:
● 320 voice chels, considered the standard IP Media Resource
● 80 voice chels, considered the low-density IP Media Resource
Up to two TN2602AP circuit packs may be installed in a single port network for load balancing.
The TN2602AP circuit pack is also compatible with and can share load balancing with the
TN2302 circuit pack. Actual capacity may be affected by a variety of factors, including the codec
and fax support.
518 Maintenance Alarms for Communication Manager, Media Gateways and Servers
SRVC
FDX
ACT
PORT 2
LNK
FDX
ACT
LNK
PORT 1
FDX
ACT
LNK