Demand test descriptions and error codes - Avaya Support

e. Error Type 1025: the CDR output device is in an off-line state, (for example, due to paper
jam or paper out for a printer device). The CDR link is torn down.
1. Check the CDR output device and act promptly to put it back to on-line state.
2. Enter test cdr-link primary | secondary command to set up the CDR link.
f. Error Type 1281: overflow of CDR records generated in the switch due to the heavy trunk
traffic and low speed CDR output device. If both primary and secondary links are ON, the
secondary link is torn down temporarily for two minutes to speed up the output process to
the primary link. No action is necessary for this Error Type.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long Test
Sequence
790 Maintenance Alarms for Communication Manager, Media Gateways and Servers
D/ND
Link Tear Down Test (#213) X Destructive
Link Retry Test (#215) X X Nondestructive