Demand test descriptions and error codes - Avaya Support

ASAI-BD (Multi-Application Platform Board)
ASAI-BD (Multi-Application Platform Board)
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
ASAI-BD MIN
WRN
test board location ASAI-BD
Refer to BRI-BD (ISDN-BRI Line Circuit Pack) Maintenance documentation for circuit pack level
errors. See also ASAI-PT (ASAI Port) and ASAI-EPT (ASAI Endpoint) for related line
information. See the following exceptions listed below:
● Hyperactivity: Currently, the common circuit pack is considered “hyperactive” if the
circuit pack sends 200 uplink messages in a 10-second period. An alarm is issued
when the limit reaches 400. When the limit reaches 500 uplink messages in 10
seconds, the board is taken out of service.
● Port Administration: In Administration Without Hardware (AWOH), the switch allows
administration of up to 8 ports in any of the first 12 ports. If the port type later reported
by the board does not match the existing type, the switch assumes it to be a MAPD
board with a different configuration and rejects the board.
Issue 5 May 2009 103