Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 388: Expansion Interface Lock Query Test (#304) 2 of 2
Error
Code
Test
Result
0 NO
BOARD
Description / Recommendation
See NO BOARD for the repair procedures.
PN Maintenance Circuit Pack Reset Test (#306)
This test is destructive.
The terminal connection will be dropped. If the Emergency Transfer switch is in the AUTO
position, Emergency Transfer will be disabled for the duration of the test.
The PN’s Maintenance circuit pack is reset by the active Expansion Interface circuit pack. After
the Expansion Interface circuit pack reports that the PN’s Maintenance circuit pack has reset, a
handshake message is sent to the Maintenance circuit pack. If the Maintenance circuit pack
responds to the handshake, the test passes. If not, it fails. If the test passes, the PN-connected
terminal is brought back up, and Emergency Transfer is restored to its previous state.
This test runs on MAINT (PN Maintenance Circuit Pack).
Table 389: PN Maintenance Circuit Pack Reset Test (#306) 1 of 3
Error
Code
Test
Result
Description / Recommendation
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2029 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
1348 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2
1 of 3