Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Single-Carrier Cabinet Power Query Test (#79)
This test queries an PN’s Maintenance circuit pack about the power status in a single-carrier
cabinet PN. This test can only detect power problems in the carriers of the PN where the Carrier
Port Power Supply physically resides.
This test runs on the DC-POWER (Single-Carrier Cabinet Environment) maintenance object.
Table 317: Single-Carrier Cabinet Power Query Test (#79) 1 of 2
Error
Code
Test
Result
Description / Recommendation
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response to the test was not received within the allowed time.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to ABORT with a 2000 error code, check for and
resolve every MAINT (Maintenance circuit pack) error. Repeat the
test.
3. If the test still aborts with this error code, escalate the problem.
2029
2319
2320
2500
ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
1186 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2