Demand test descriptions and error codes - Avaya Support

If errors are: They may be due to:
Occasional Statistical buffer sizing
Receive FIFO Overflow Error Counter Test (#596)
Persistent Circuit pack congestion that requires redistribution of traffic load
Table 406: Receive FIFO Overflow Error Counter Test (#596)
Error
Code
Test
Result
Description / Recommendation
2000 ABORT Did not receive test response within the allowed time.
1. Retry command at 1-minute intervals up to 5 times.
2. If the problem persists, reset the circuit pack with reset board
location.
3. If the problem persists, replace the circuit pack.
2100 ABORT Could not allocate the necessary system resources to run test.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the problem persists, escalate the problem.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the problem persists, escalate the problem.
1–10 FAIL The circuit pack detects overflow errors. The error code indicates the
value of the error counter.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to fail, run the Packet Interface Test #598 with
test board location.
3. If the Packet Interface Test #598 fails, see Packet Interface Test
(#598) for repair procedures.
PASS Circuit pack detects no errors.
Issue 5 May 2009 1385