Demand test descriptions and error codes - Avaya Support

Table 102: EMG-XFER Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
257 (c) 0 Emergency Transfer Query
(#124)
On/Off
Board
WRN ON test environment UU r 3
Notes:
a. Error Type 0: Run the short test sequences first. If every tests passes, run the long test
sequence. Refer to each appropriate test’s description and follow its recommended repair
procedures.
b. Error Type 1: the Emergency Transfer switch located on the Processor circuit pack is set to
the manual ON position (up). When the Emergency Transfer switch is in this position, a
Major alarm in generated.
c. Error Type 257: the Emergency Transfer switch located on the Processor circuit pack is set
to the manual OFF position (down). When the Emergency Transfer switch is in this position,
a Warning alarm is generated.
Demand test descriptions and error codes (Single Carrier)
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
1. D = Destructive; ND = Nondestructive
Recommended Action
406 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Long Test
Sequence
D/ND 1
Cabinet Temperature Query Test (#122) X X ND
Emergency Transfer Query Test (#124) X X ND
External Device Alarm Query Test (#120) X X ND
Ring Generator Initialization Test (#117) X X ND
Ring Generator Query Test (#118) X X ND