Demand test descriptions and error codes - Avaya Support

. Error Type 10000-10063: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_EAL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10003 points to port network 4) Use list config
port-network to show the cabinet number associated with a port network.
c. Error Type 10100-10163: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_INL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10003 points to port network 4). Use list config
port-network to show the cabinet number associated with a port network.
d. Error Type 10200-10263: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_HW. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10203 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
e. Error Type 10300-10363: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_PER. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10303 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
f. Error Type 10400-10463: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_DS1. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10403 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
g. Error Type 10500-10563: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_BFD. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (10203 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
h. Error Type 10600-10664: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_SNIL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms. The
last two digits of the Error Code indicate the fiber-link number of the fiber that reported the
retired alarm. Use list fiber-link to show the location of the fiber.
i. Error Type 10700-10764: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the A-PNC associated with fault class FC_SNIHW. Use status pnc
to look at the state of health indexes for the PNCs, and investigate any associated alarms.
768 Maintenance Alarms for Communication Manager, Media Gateways and Servers