Demand test descriptions and error codes - Avaya Support

Read the image into memory
FW-STDL (Firmware Station Download)
Before the firmware can be downloaded to the target stations, the image file must first be read
into Communication Manager memory:
1. On the System Access Terminal (SAT) using the craft login and password, enter
change tftp-server
The TFTP Server Configuration form displays the following:
change tftp-server Page 1 of 1
Local Node Name: clan1
TFTP Server Node Name: tftpserv1
TFTP Server Port: 69
File to Retrieve: 2420v01.bin
File Status:
File Size:
Filename in Memory:
Station Type:
TFTP Server Configuration
2. Enter the node name of the C-LAN that connects over the LAN to the FTP file server in the
Local Node Name field.
3. Enter the host name of the FTP file server in the TFTP Server Node Name field.
4. Enter the port number in the TFTP Server Port field.
5. Enter the name of the File to Retrieve from the FTP file server and submit the command.
6. Enter display tftp-server
display tftp-server
Local Node Name: clan1
TFTP Server Node Name: gingerale
TFTP Server Port: 69
File to Retrieve: 2420v015.bin
TFTP Server Configuration
File Status: File download successful
File Size: 236
Filename in Memory: 2420v015.bin
Station Type: 2420
7. Verify the file download was successful by checking the File Status field.
Issue 5 May 2009 481