Demand test descriptions and error codes - Avaya Support

Error log entries and recommended actions
Table 195: M/T-BD Error Log Entries
Error Type Aux Data Associated Test Alarm
Level 1
M/T-BD (Maintenance/Test Circuit Pack)
On/Off
Board
Recommended Action
0 (a) 0 Any Any Any test port location
1 (b) 0 SAKI Sanity test
(#53)
18 (c) 0 busyout board
location
36 (d) 0
MIN ON
217 (f) WRN ON
257 (e) 0 Control Channel
Looparound Test
(#52)
267 (f) WRN ON
513 (g) 4352 to
4357
769 (h) 4358
WRN OFF release board location
MIN ON test board location r 3
1025 (i) 4363 NPE Audit Test (#50) test board location l
1538 (j) 0 MIN ON
3840 (k) 4096 to
4101
3999 (l) Any None
1. Major or Minor alarms on this MO may have been downgraded to Warning based on the values in set
options.
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 1: the circuit pack has stopped functioning. Reset the circuit pack using
busyout board location, reset board location, and release board
location. If the SAKI Sanity test (#53) passes, the on-board circuitry is healthy. If the
SAKI Sanity test (#53) fails, replace the circuit pack.
Issue 5 May 2009 677