Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 284: Battery and Power Supply Query Test (#5) 6 of 7
Error
Code
8
(cont’d)
Test
Result
FAIL
(cont’d)
Description / Recommendation
d. If there is an alarm and every LED is OK (PWR OK and
BOK) on the rectifier modules and the BIU (Battery
Interface Unit), verify that the BIU and the RM0850
rectifiers are seated properly (plugged in). If the BOK LED
on the BIU is OK, check the number of rectifiers serving
this cabinet:
No. of carriers/cabinet No. of rectifiers/cabinet
1 2
2 3
3 3
4 4
5 4
If the number of rectifiers is correct replace the maintenance
circuit pack in the PN.
10 FAIL DC-powered cabinet: The PN’s Maintenance circuit pack is
incorrectly reporting a problem with power. Replace the suspect circuit
pack and run the test again.
AC-powered cabinet: Error codes 2 and 8 have occurred. Refer to
these descriptions. Also, refer to this test’s description for Error Code
14.
12 FAIL DC-powered cabinet: The PN’s Maintenance circuit pack is
incorrectly reporting a problem with power. Replace the suspect circuit
pack and run the test again.
AC-powered cabinet: Error codes 4 and 8 have occurred. Refer to
these descriptions. Also, refer to this test’s description for Error Code
14.
1082 Maintenance Alarms for Communication Manager, Media Gateways and Servers
6 of 7