Demand test descriptions and error codes - Avaya Support

RANL-STA (Remote Analog Line (Station) Port)
MO Name
in Log
RANL-STA (Remote Analog Line (Station) Port)
Alarm Level Initial Command to Run Full Name of MO
RANL-STA MIN test port location long Remote Analog Line Port
WRN test port location
The RANL-STA MO maintains the circuitry associated with a port which has been translated as
analog station.
Failures of the neon message waiting lamp power and the common ringing application circuitry
are reported as part of common port circuit pack errors. See errors 1281 and 1793 in XXX-BD
(Common Port Circuit Pack/Media Module).
Ringing Caused by Maintenance Testing
Test #48 may cause some terminal equipment to ring briefly during daily maintenance. If this
ringing disturbs the customer or the terminal equipment, disable it in the Tests field of the
change station extension screen. This also disables Test 35 on that station.
Error log entries and recommended actions
Table 219: RANL-STA Error Log Entries 1 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended Action
0 (a) 0 Any Any Any test port location
1 (b) 40960
40975
40977
15 (c) Any Port Audit and
Update test (#36)
18 0 busyout
station
extension
257 (d) 40973
WRN ON release station extension
1 of 2
Issue 5 May 2009 795