Demand test descriptions and error codes - Avaya Support

MMI-PT (Multimedia Interface Port)
MO Name in Log Alarm
Level
MMI-PT MAJ
MIN
WRN
Initial Command to Run Full Name of MO
test port location long Multimedia Interface Port
Note:
Note: Refer to Chapter 4: General troubleshooting in Maintenance Procedures for
Avaya Aura Communication Manager, Media Gateways and Servers
(03-300432) for MMCH troubleshooting information.
The Multimedia Interface circuit pack provides a number of H.221 protocol terminations for bit
streams received from the TDM bus. The Multimedia Interface demultiplexes the H.221 bit
stream (audio, video, data, control, and indication signals) and transmits the bit streams onto
the TDM bus to be processed by the appropriate circuit packs.
Each Multimedia Interface circuit pack contains 32 separately maintained “ports,” more
commonly referred to as “resources.” MMI-PT represents one of these 32 resources. At system
boot or when the circuit pack is inserted, 32 resources are inserted into the system.
The MMI circuit pack contains 4 Digital Signal Processors (DSPs) which manage the 32
resources. These resources are directly mapped to DSPs:
Resource Direct Map
1–8 DSP1
9–16 DSP2
17–24 DSP3
25–32 DSP4
All 8 resources that the circuit pack controls may be placed out of service by the failure of one of
these DSPs.
660 Maintenance Alarms for Communication Manager, Media Gateways and Servers