Demand test descriptions and error codes - Avaya Support

Table 165: MAINT Error Log Entries 2 of 2
Error
Type
513 (b) 0
1
MGR I Channel Loop
test (#228)
769 (c) Any Sanity Handshake test
(#106)
1537 (d) 0
1
Sanity Maze test
(#303)
2049 (d) Any Battery Holdover
Vintage Verification
Test (#311)
2561 (b) 0
1
Aux
Data
2817 (b) 0 (c)
1
Associated Test Alarm
Level
Sanity Handshake test
(#106)
Serial Channel Loop
test (#229)
On/Off
Board
MAINT (PN Maintenance Circuit Pack)
Recommended Action
MIN ON test maintenance r 3
MIN ON test maintenance r 3
WRN ON test maintenance
MIN ON test maintenance r 3
MIN ON test maintenance r 3
3329 (e) Any Serial Link Test (#337) MIN
1
WRN
OFF test maintenance r 3
3585 (f) Any Serial Link Test (#337) MIN
WRN2 OFF test maintenance r 3
1. Major and Minor alarms may be downgraded to Warning alarms based on the value used in set options.
2 of 2
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 1, 513, 2561, 2817: a value of 0 indicates that PNC-A (and therefore, the
Expansion Interface circuit pack located on PNC-A) was active when this error occurred. A
value of 1 indicates that PNC-B (and therefore, the Expansion Interface circuit pack located
on PNC-B) was active when this error occurred. To clear this problem, make sure the active
PNC is the same as that indicated by the Aux Value.
c. Error Type 769: multiple values can appear in the Aux Data field. There will be other
errors in the log if there is a real problem. Use these other errors to troubleshoot the
problem.
d. Error Type 1537, 2049: the PN’s Maintenance circuit pack hardware vintage does not
support battery holdover for all carriers. This failure indicates that the cabinet administration
is set for battery holdover for all carriers.
Issue 5 May 2009 585