Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 438: FIBER-LK Configuration Audit (#759) 3 of 10
Error
Code
102 -
109,
113 -
120
Test
Result
Description / Recommendation
FAIL The SNI circuit pack cot communicate with the SNI in a different slot.
1. Perform the Fiber link fault isolation procedures described in Chapter
4: General troubleshooting in Maintenance Procedures for Avaya
Aura Communication Manager, Media Gateways and Servers
(03-300432). This should resolve multiple SNI-PEER errors.
2. Determine the slot number of the other SNI: Subtract 100 from the
Error Code. For example, if the Error Code is 107, the SNI slot
number is 7. This number is referred to as the "specified SNI slot".
See Table 435: SNI Slot / Error Type to determine the Error Type for
SNI-PEER errors for this specified SNI slot. For example, for SNI slot
9, the Error Type is 1793.
3. If the SNI being tested has SNI-PEER errors of the Error Type
specified in Step 2, replace the SNI being tested. Replacing an SNI
may be service interrupting. Refer to SNI-BD (SNI Circuit Pack) for
the procedure to replace an SNI. To view SNI-PEER errors, enter
display errors with category PNC-PEER. Retry the command.
4. If the SNI being tested still has SNI-PEER errors of the specified
Error Type, replace the SNI in the specified SNI slot.
112 FAIL The SNI circuit pack cot communicate with the active SNC.
1. Enter list fiber-link to see a fiber link’s endpoints.
2. Check the error log for other SNI circuit packs in the same carrier
with an SNI-BD error with Error Type 257. Enter display errors
with category PNC to view SNI-BD errors. If other SNI circuit packs
in the same switch node carrier have Error 257, replace the active
SNC in this switch node carrier. Replacing an SNC may be service
interrupting. Refer to SNC-BD (Switch Node Clock Circuit Pack) for
the procedure for replacing an SNC.
3. Replace this SNI. Refer to SNI-BD (SNI Circuit Pack) for the
procedure.
4. Replace the active SNC in the same switch node carrier.
1462 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 10