Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
-PT (Announcement Port)
The TN750 announcement circuit pack provides an integrated means for recording
announcements that can be played back on demand by call processing as part of a calling
feature (that is, announcements on hunt group calls). There are 16 Announcement Ports on the
announcement circuit pack. Each port can play any integrated announcement, independently of
the other ports. If there are any errors associated with the circuit pack, refer to -BD
(Announcement circuit pack).
The announcement circuit pack has two processors on it. The first processor, or Angel, controls
the circuit pack, and communicates with the switch via the control chel on the TDM Bus. The
second processor, or SP, controls the speech memory and announcements. Digital speech is
converted from its TDM Bus form to an internal storage form (for recording) and vice versa (for
playbacks) by the 140AY device on the circuit pack, which has 16 chels, one for each
Announcement Port.
See -BD (Announcement circuit pack) for general notes that apply to problems on the TN750
announcement circuit pack.
Note: Unlike
MO Name in Log Alarm Level Initial command to run Full name of MO
-PT MIN
WRN
● There is no memory card in the system.
test port location l Announcement Port
● The memory card in the system does not have a valid announcement file saved on it.
Note:
translations, there is no provision in the system for automatically saving
announcements to the memory card.
96 Maintenance Alarms for Communication Manager, Media Gateways and Servers