Demand test descriptions and error codes - Avaya Support

Figure 44: Typical ESM connections
Figure notes:
CAUTION: The
1 2
cydf012 KLC 092801
1. Port B Y-cable connector to a TN787 MMI
(Multimedia Interface) circuit pack
2. Port A Y-cable connector to a TN2207 PRI
circuit pack
3. 25-pair Y-cable
4. 356A adapter
! CAUTION:
TN2207 circuit pack is the only pack that allows connection of an ESM to
S8700 Media Server configurations.
Error log entries and recommended actions
Table 189: MMI-BD Error Log Entries 1 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
5. D8W cord connected to 356A adapter port
1
6. Expansion Service Module (ESM)
7. Port B on compatible PRI (primary rate
interface) card
654 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3
4
5
On/Off
Board
6
7
8
Recommended Action
0 (a) 0 Any Any Any test board location
1 (b) Any MIN ON
18 (c) 0 busyout board
location
WRN OFF release board location
217 (d) 0 WRN ON
257 (e) 65535 Control Channel
Looparound Test (#52)
513 (f) 4352 to
4357
Uplink error from
circuit pack
MIN ON test board location r 3
1 of 2